http://www.cmd.com/rss/productfeed.php Product Information en-us Sun, 21 Mar 2010 18:47:28 PDT Sun, 21 Mar 2010 18:47:28 PDT www.cmd.com Product Summary Feed Generator garybz@cmd.com (Gary Betz) garybz@cmd.com (Gary Betz) http://www.cmd.com/products/dds/?product=CM1204 http://www.cmd.com/products/dds/?product=CM1204 marketing@cmd.com (CMD) ESD Protectors The CM1204 is a quad ESD transient voltage supression diode array. Each diode provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). These diodes safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than ±30kV. more ]]> Thu, 17 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1205 http://www.cmd.com/products/dds/?product=CM1205 marketing@cmd.com (CMD) ESD Protectors The CM1205 transient voltage suppressor array provides a very high level of protection for sensitive electronic components that may be subjected to ESD. more ]]> Tue, 03 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1213 http://www.cmd.com/products/dds/?product=CM1213 marketing@cmd.com (CMD) ESD Protectors The CM1213 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, offering two advantages. First, it protects the VCC rail against ESD strikes, and second, it eliminates the need for a bypass capacitor that would otherwise be needed for absorbing positive ESD strikes to ground. The CM1213 will protect against ESD pulses up to ±8kV per the IEC 61000-4-2 standard. more ]]> Wed, 14 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1213A http://www.cmd.com/products/dds/?product=CM1213A marketing@cmd.com (CMD) ESD Protectors The CM1213A family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, offering two advantages. First, it protects the VCC rail against ESD strikes, and second, it eliminates the need for a bypass capacitor that would otherwise be needed for absorbing positive ESD strikes to ground. The CM1213A will protect against ESD pulses up to ±8kV per the IEC 61000-4-2 standard. more ]]> Fri, 02 May 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1214A http://www.cmd.com/products/dds/?product=CM1214A marketing@cmd.com (CMD) ESD Protectors The CM1214A PicoGuard® ESD protector is used to protect bipolar signal lines against electrostatic discharge (ESD). The CM1214A allows operation in high-speed environments with signals levels up to +5V. more ]]> Mon, 29 Oct 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1215 http://www.cmd.com/products/dds/?product=CM1215 marketing@cmd.com (CMD) ESD Protectors The CM1215 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. The CM1215 will protect against ESD pulses up to ±15kV per the IEC 61000-4-2 standard. more ]]> Thu, 11 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1216 http://www.cmd.com/products/dds/?product=CM1216 marketing@cmd.com (CMD) ESD Protectors The CM1216 family of diode arrays provides ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. The CM1216 protects against ESD pulses up to ±15kV per the IEC 61000-4-2 standard. more ]]> Thu, 11 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1218 http://www.cmd.com/products/dds/?product=CM1218 marketing@cmd.com (CMD) ESD Protectors The CM1218 family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components which may be subjected to electrostatic discharge (ESD). more ]]> Wed, 26 Sep 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1218-C4SE http://www.cmd.com/products/dds/?product=CM1218-C4SE marketing@cmd.com (CMD) ESD Protectors The CM1218-C4 device features transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components which may be subjected to electrostatic discharge (ESD). more ]]> Fri, 26 Oct 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1219 http://www.cmd.com/products/dds/?product=CM1219 marketing@cmd.com (CMD) ESD Protectors The CM1219 family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components which may be subjected to electrostatic discharge (ESD). more ]]> Wed, 26 Sep 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1220 http://www.cmd.com/products/dds/?product=CM1220 marketing@cmd.com (CMD) ESD Protectors California Micro Devices' CM1220 ESD protection arrays are available in four and eight channel configurations. Each ESD channel features a nominal capacitance of 14pF making these devices ideal for protecting high speed I/O ports and LCD and camera data lines without significantly affecting signal integrity. The CM1220 integrates avalanche-type ESD diodes on every channel, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). These diodes safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, these devices protect for contact discharges at greater than ±30kV. more ]]> Fri, 03 Feb 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1223 http://www.cmd.com/products/dds/?product=CM1223 marketing@cmd.com (CMD) ESD Protectors The CM1223 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, absorbing positive ESD strikes and also providing ESD protection for the VP rail. An additional diode is added in this device to serve as backdrive current protection. The CM1223 protects against ESD pulses up to ±8kV per the IEC 61000-4-2 standard. In addition, all pins are protected from contact discharges of greater than ±15kV as outlined by the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD. more ]]> Thu, 15 Oct 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1224 http://www.cmd.com/products/dds/?product=CM1224 marketing@cmd.com (CMD) ESD Protectors The CM1224 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, offering two advantages. First, it protects the VCC rail against ESD strikes, and second, it eliminates the need for a bypass capacitor that would otherwise be needed for absorbing positive ESD strikes to ground. The CM1224 protects against ESD pulses up to ±8kV per the IEC 61000-4-2 standard. more ]]> Wed, 16 Jan 2008 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1225 http://www.cmd.com/products/dds/?product=CM1225 marketing@cmd.com (CMD) ESD Protectors The CM1225 diode array has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive loading. This device is ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to the ground pins (VN). A Zener diode is embedded between the positive terminal of the diode pair to the ground. This eliminates the need for an external bypass capacitor to absorb positive ESD strikes to ground. The CM1225 protects against ESD pulses up to ±8kV per the IEC 61000-4-2 standard. more ]]> Tue, 23 Dec 2008 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1227-04DE http://www.cmd.com/products/dds/?product=CM1227-04DE marketing@cmd.com (CMD) ESD Protectors The CM1227-04DE diode array has been designed to provide ESD protection for electronic components or subsystems that require minimal capacitive loading. This device is ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series that steer the positive or negative ESD current pulses to the ground pins (VN). A Zener diode is embedded between the positive terminal of the diode pair and ground. This eliminates the need for an external bypass capacitor to absorb positive ESD strikes to ground. The CM1227-04DE protects against ESD pulses up to ±15kV per the IEC 61000-4-2 standard. more ]]> Mon, 30 Nov 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1230 http://www.cmd.com/products/dds/?product=CM1230 marketing@cmd.com (CMD) ESD Protectors The CM1230 is a family of 2, 4 and 8 channel, very low capacitance ESD protection diode arrays in CSP form factor. This device is ideal for protecting systems with high data and clock rates or for circuits that require low capacitive loading. Each channel consists of a pair of ESD diodes that act as clamp diodes that steer positive or negative ESD current pulses to either the positive or negative supply rail. A zener diode is integrated into the array between the positive and negative supply rails. The VCC rail is thus protected from ESD strikes and eliminates the need for a bypass capacitor to absorb positive ESD strikes to ground. Each channel of the CM1230 can safely dissipate ESD strikes of ±8kV, meeting the Level 4 requirement of the IEC61000-4-2 international standard for contact discharges as well as ±15kV air discharges per the IEC61000-4-2 specification. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±15kV. more ]]> Wed, 16 May 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1231-02SO http://www.cmd.com/products/dds/?product=CM1231-02SO marketing@cmd.com (CMD) ESD Protectors The CM1231 is a member of the XtremeESD® product family and is specifically designed for next generation deep submicron ASIC protection. These devices are ideal for protecting systems with high data and clock rates and for circuits requiring low capacitive loading such as USB 2.0. more ]]> Mon, 17 Dec 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1233 http://www.cmd.com/products/dds/?product=CM1233 marketing@cmd.com (CMD) ESD Protectors The PicoGuard XS® protection family is specifically designed for next generation deep submicron high speed data line protection. more ]]> Tue, 18 Mar 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1234 http://www.cmd.com/products/dds/?product=CM1234 marketing@cmd.com (CMD) ESD Protectors The PicoGuard XS® protection family is specifically designed for next generation deep submicron high speed data line protection. more ]]> Thu, 08 May 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1235 http://www.cmd.com/products/dds/?product=CM1235 marketing@cmd.com (CMD) ESD Protectors The PicoGuard XS® protection family is specifically designed for next generation deep submicron high speed data line protection. more ]]> Sun, 22 Feb 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1236 http://www.cmd.com/products/dds/?product=CM1236 marketing@cmd.com (CMD) ESD Protectors The PicoGuard XS® protection family is specifically designed for next generation deep submicron high speed data line protection. more ]]> Tue, 24 Feb 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1238 http://www.cmd.com/products/dds/?product=CM1238 marketing@cmd.com (CMD) ESD Protectors The PicoGuard XS (XtremeESD®) protection family is specifically designed for next generation deep submicron high speed data line protection. more ]]> Wed, 05 Aug 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1240 http://www.cmd.com/products/dds/?product=CM1240 marketing@cmd.com (CMD) ESD Protectors California Micro Devices' CM1240 is a four channel ESD protection array. Three channels of the CM1240 are low voltage (LV) diodes, which have a capacitance of 7pF enabling them to protect high speed I/O ports while providing robust ESD protection. The other channel of the CM1240 is a high voltage (HV) diode which has a capacitance of 25pF enabling it to protect power supply inputs or OLED power rails, etc. more ]]> Wed, 16 May 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1241 http://www.cmd.com/products/dds/?product=CM1241 marketing@cmd.com (CMD) ESD Protectors more ]]> Thu, 16 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1244 http://www.cmd.com/products/dds/?product=CM1244 marketing@cmd.com (CMD) ESD Protectors more ]]> Wed, 17 Oct 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1248-04QG http://www.cmd.com/products/dds/?product=CM1248-04QG marketing@cmd.com (CMD) ESD Protectors more ]]> Tue, 29 May 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1248-04S9 http://www.cmd.com/products/dds/?product=CM1248-04S9 marketing@cmd.com (CMD) ESD Protectors more ]]> Mon, 27 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1248-08DE http://www.cmd.com/products/dds/?product=CM1248-08DE marketing@cmd.com (CMD) ESD Protectors more ]]> Mon, 10 Nov 2008 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1249-04S9 http://www.cmd.com/products/dds/?product=CM1249-04S9 marketing@cmd.com (CMD) ESD Protectors more ]]> Mon, 27 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1263-02SE http://www.cmd.com/products/dds/?product=CM1263-02SE marketing@cmd.com (CMD) Low Capacitance ESD Protectors The CM1263-02SE is a 2-channel, low capacitance ESD protection array suited for high-speed serial interfaces. more ]]> Tue, 15 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1263-06DE http://www.cmd.com/products/dds/?product=CM1263-06DE marketing@cmd.com (CMD) Low Capacitance ESD Protectors The CM1263 is a 6-channel, low capacitance ESD protection array suited for high-speed serial interfaces. more ]]> Mon, 19 Jan 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1282 http://www.cmd.com/products/dds/?product=CM1282 marketing@cmd.com (CMD) ESD Protectors more ]]> Tue, 10 Mar 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1293 http://www.cmd.com/products/dds/?product=CM1293 marketing@cmd.com (CMD) ESD Protectors The CM1293 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, offering two advantages. First, it protects the VCC rail against ESD strikes, and second, it eliminates the need for a bypass capacitor that would otherwise be needed for absorbing positive ESD strikes to ground. The CM1293 will protect against ESD pulses up to (±8kV contact discharge) per the IEC 61000-4-2 Level 4 standard. more ]]> Tue, 20 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1293A http://www.cmd.com/products/dds/?product=CM1293A marketing@cmd.com (CMD) ESD Protectors The CM1293A family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN which helps protect the VCC rail against ESD strikes. The CM1293A protects against ESD pulses up to ±8kV contact discharge) per the IEC 61000-4-2 Level 4 standard. more ]]> Wed, 18 Nov 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1400 http://www.cmd.com/products/dds/?product=CM1400 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1400-03 is a six channel low-pass filter array that reduces EMI/RFI emissions while at the same time providing ESD protection. It is used on data ports on mobile devices. To reduce EMI/RFI emissions, the CM1400-03 integrates a pi-style filter (C-R-C) for each of the 6 channels. Each high quality filter provides greater than 30dB attenuation in the 800-2700 MHz range relative to the pass band attenuation. These pi-style filters also support bidirectional filtering, controlling EMI both to and from a data port connector. more ]]> Tue, 03 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1401 http://www.cmd.com/products/dds/?product=CM1401 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1401-03 is a multichannel array with four low-pass filter with ESD channels and four ESD-only channels. They reduce EMI/RFI emissions on a data port and protect against ESD on a USB port. Each EMI/RFI channel integrates a high quality pi-style filter (C-R-C) which provides greater than 30dB attenuation in the 800-2700 MHz range relative to the pass band attenuation. These pi-style filters are bidirectional, controlling EMI both to and from a data port connector. more ]]> Tue, 03 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1402 http://www.cmd.com/products/dds/?product=CM1402 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CM1402 is an EMI filter array with ESD protection, which integrates three pi filters (C-R-C) and two additional channels of ESD protection. The CM1402 has component values of 20pF-47Ω-20pF, and 20pF-100Ω-20pF. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±10kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±25kV. more ]]> Wed, 02 Nov 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1405 http://www.cmd.com/products/dds/?product=CM1405 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Device's CM1405 is an EMI filter array with ESD protection, which integrates eight Pi- filters (C-R-C). The CM1405 has component values of 25pF-100Ω-25pF. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±30kV, exceeding the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 26 Aug 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1406 http://www.cmd.com/products/dds/?product=CM1406 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1406 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). Each CM1406 filter has component values of 15pF-200OHM-15pF. These parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 11 Apr 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1407 http://www.cmd.com/products/dds/?product=CM1407 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1407 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1407 has component values of 7.5pF-200Ω-7.5pF (fc = 210MHz). The parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 22 May 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1408-04 http://www.cmd.com/products/dds/?product=CM1408-04 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1408-04DE is an EMI filter array with ESD protection, which integrates four pi filters (C-R-C). more ]]> Tue, 11 Sep 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1408-06/E6 http://www.cmd.com/products/dds/?product=CM1408-06/E6 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1408-06/E6 is an EMI filter array with ESD protection, which integrates six pi filters (C-R-C). more ]]> Mon, 26 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1408-08 http://www.cmd.com/products/dds/?product=CM1408-08 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1408-04DE is an EMI filter array with ESD protection, which integrates eight pi filters (C-R-C). more ]]> Tue, 11 Sep 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1409 http://www.cmd.com/products/dds/?product=CM1409 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1409 is a family of pi-style EMI filter arrays with ESD protection, which integrates six and eight filters (C-R-C) in small form factor TDFN 0.50mm pitch packages. The CM1409 has component values of 15pF-100Ω-15pF per channel. The CM1409 has a cut-off frequency of 110MHz and can be used in applications with data rates up to 44Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, which even exceeds the maximum requirement of the IEC61000-4-2 international standard. Using the MILSTD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 10 Dec 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1410 http://www.cmd.com/products/dds/?product=CM1410 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1410 is a quad low-pass filter array integrating four pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This device is custom-designed to interface with the headset port on a cellular telephone, and contains 3 different filter values. Each high quality filter provides more than 20dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from the microphone and speaker elements. They also support bipolar signals, enabling audio signals to pass through without distortion. more ]]> Thu, 15 Sep 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1411 http://www.cmd.com/products/dds/?product=CM1411 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1411 is a dual, low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while providing ESD protection. This part is custom-designed to interface with a speaker port on a cellular telephone or similar device. Each high quality filter provides more than 35dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering that control EMI both to and from a speaker element. They also support AC signals with a cutoff frequency of 31MHz, enabling audio signals to pass through without distortion. more ]]> Wed, 29 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1412 http://www.cmd.com/products/dds/?product=CM1412 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1412 is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while providing ESD protection. This part is custom-designed to interface with a microphone port on a cellular telephone or similar device. Each high quality filter provides more than 35dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from a microphone element. They also support AC signals, enabling audio signals to pass through without distortion. more ]]> Wed, 29 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1414 http://www.cmd.com/products/dds/?product=CM1414 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1414 is a low-pass filter array designed specifically to reduce EMI/RFI emissions and provide ESD protection for a headset port on cellular and mobile devices. The CM1414 integrates two high quality, pi-style filters (C-R-C) filters, one for a microphone and one for an earpiece or speaker, each providing more than 35dB attenuation relative to the pass band attenuation in the 800-2700 MHz range. These filters support bidirectional filtering, reducing EMI both to and from the headset port and support bipolar audio signals without distortion. more ]]> Thu, 03 Nov 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1416 http://www.cmd.com/products/dds/?product=CM1416 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CMD's CM1416 is an EMI filter array with ESD protection, which integrates two Pi-filters (C-R-C). The CM1416 has component values of 117pF-2Ω-117pF. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes safely dissipate ESD strikes of ±30kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, these devices protect for contact discharges at greater than ±30kV. more ]]> Tue, 19 Sep 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1418 http://www.cmd.com/products/dds/?product=CM1418 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1418 is an L-C EMI filter array with ESD protection, which integrates two Pi-filters (C-L-C) for the headset speaker. The CM1418 has component values of 117pF/3.0nH/117pF. The parts include ESD protection diodes on all input/output pins, that provide a very high level of protection for sensitive electronic components against possible electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±30kV, beyond the maximum requirement of the IEC61000-4-2 international standard. In accordance with MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Thu, 30 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1419 http://www.cmd.com/products/dds/?product=CM1419 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices’ CM1419 is an L-C EMI filter array with ESD protection, which integrates two Pi-filters (C-L-C) for the headset speaker. The CM1419 has component values of 117pF-3.0nH-117pF. The parts include ESD protection diodes on all input/output pins, that provide a very high level of protection for sensitive electronic components against possible electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±30kV, beyond the maximum requirement of the IEC61000-4-2 international standard. In accordance with MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Thu, 30 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1420 http://www.cmd.com/products/dds/?product=CM1420 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CM1420 and CM1422 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CM1420/22 has component values of 15pF-100OHM-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 03 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1421 http://www.cmd.com/products/dds/?product=CM1421 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1421 is a multichannel array consisting of four low-pass filters with integrated ESD protection and four ESD-only protection channels designed to reduce EMI/RFI emissions on LCD data lines in mobile handsets. The CM1421 has component values of 15pF-100Ω-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 15 Nov 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1422 http://www.cmd.com/products/dds/?product=CM1422 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CM1420 and CM1422 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CM1420/22 has component values of 15pF-100OHM-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 03 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1423 http://www.cmd.com/products/dds/?product=CM1423 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1423 is an EMI filter array with ESD protection, which integrates six Pi- filters (C-R-C) and four channels of ESD protection. The CM1423's filters have component values of 12pF-100Ω-12pF. The part includes ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). All the ESD diodes safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1425 http://www.cmd.com/products/dds/?product=CM1425 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CM1425 is an EMI filter array with ESD protection, which integrates 4 pi filters (C-R-C). The CM1425 has component values of 20pF-100Ω-20pF. The parts include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 16 Sep 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1426 http://www.cmd.com/products/dds/?product=CM1426 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1426 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in a Chip Scale Package with 0.50mm pad pitch. The CM1426 has component values of 8.5pF-100Ω-8.5pF per channel. The CM1426 has a cut-off frequency of 230MHz and can be used in applications where the data rates are as high as 92Mbps. The parts include avalanche-type ESD diodes on every pin that provide a very high level of protection for sensitive electronic components against possible ESD strikes. The ESD protection diodes safely dissipate ESD strikes of ±8kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±15kV. more ]]> Fri, 05 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1430 http://www.cmd.com/products/dds/?product=CM1430 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1430 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor TDFN 0.40mm pitch packages. The CM1430 has component values of 8.5pF-100Ω-8.5pF per channel. The CM1430 has a cut-off frequency of 200MHz and can be used in applications where the data rates are as high as 80Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Thu, 02 Mar 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1431 http://www.cmd.com/products/dds/?product=CM1431 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1431 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor TDFN 0.40mm pitch packages. The CM1431 has component values of 15pF-100Ω-15pF per channel. The CM1431 has a cut-off frequency of 120MHz and can be used in applications where the data rates are as high as 48Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 06 Feb 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1436 http://www.cmd.com/products/dds/?product=CM1436 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1436 is an EMI filter array with ESD protection, which integrates either four, six or eight pi filters (C-R-C). Each CM1436 filter has component values of 15pF-200Ω-15pF. These parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 06 Feb 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1437 http://www.cmd.com/products/dds/?product=CM1437 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1437 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1437 has component values of 7.5pF-200Ω-7.5pF (fC = 210MHz). The parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 13 Nov 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1440 http://www.cmd.com/products/dds/?product=CM1440 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1440 is a six channel low-pass EMI filter array with ESD protection that reduces EMI/RFI emissions while providing robust protection from ESD strikes. Each EMI filter channel integrates a high quality pi-style filter (30pF-100Ω-30pF) which provides greater than 30dB of attenuation in the 800MHz to 2.7GHz frequency range. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports safely dissipate ESD strikes of ±30kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1441 http://www.cmd.com/products/dds/?product=CM1441 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1441 is a multichannel EMI/ESD array consisting of four low-pass filter with ESD channels to reduce EMI emissions on data ports and lines and four dedicated ESD-only channels. Each EMI filter channel integrates a high quality pi-style filter (30pF-100Ω-30pF) which provides greater than 30dB of attenuation in the 800MHz to 2.7GHz frequency range. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). All ESD protection diodes safely dissipate ESD strikes of ±30kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1442 http://www.cmd.com/products/dds/?product=CM1442 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1442 is a family of pi-style EMI filter arrays with ESD protection, which integrates six and eight filters (C-R-C) in Chip Scale Package form factor with 0.40mm pitch. The CM1442 has component values of 15pF-100Ω-15pF per channel. The CM1442 has a cut-off frequency of 120MHz and can be used in applications where the data rates are as high as 48Mbps. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 08 Nov 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1443-04 http://www.cmd.com/products/dds/?product=CM1443-04 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1443-04CP is an four channel EMI filter Array with ESD protection. more ]]> Thu, 30 Oct 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1443-06 http://www.cmd.com/products/dds/?product=CM1443-06 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1443-06CP is a six channel EMI filter Array with ESD protection. more ]]> Thu, 30 Oct 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1443-08 http://www.cmd.com/products/dds/?product=CM1443-08 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1443-08CP is an eight channel EMI filter Array with ESD protection. more ]]> Fri, 01 May 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1450 http://www.cmd.com/products/dds/?product=CM1450 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1450 comprises a family of inductor-capacitor (L-C) based EMI filter arrays with integrated ESD protection in a CSP form factor. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each EMI filter channel of the CM1450 is implemented as a 5-pole L-C filter where the component values are 14pF-17nH-14pF-17nF-14pF. The CM1450's roll-off frequency at -10dB attenuation is 400MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than 35dB over the 800MHz to 2.7GHz frequency range. The parts integrate ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the Level 4 requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 30 Aug 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1451 http://www.cmd.com/products/dds/?product=CM1451 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1451 is an inductor-capacitor (L-C) based EMI filter array with integrated ESD protection in CSP. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each channel is implemented as a 5-pole L-C filter with the component values 9.5pF-17nH-9.5pF-17nF-9.5pF. The CM1451's roll-off frequency at -10dB attenuation is 500MHz. It can be used in applications where the data rates are as high as 200Mbps while providing greater than 35dB attenuation over the 800MHz to 2.7GHz frequency range. The device has ESD protection diodes on every pin that provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the Level 4 requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 02 Nov 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1452 http://www.cmd.com/products/dds/?product=CM1452 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1452 family of pi-style EMI filter arrays with ESD protection, integrates four, six and eight filters (CL-C) in CSP form factor with 0.40mm pitch. Each EMI filter channel of the CM1452 is implemented as a 3pole L-C filter where the component values are 20pF-17nH-20pF. The CM1452 roll-off frequency at -6dB attenuation is 330MHz and can be used in applications where the data rates are as high as 132Mbps and provide greater than 30dB over the 800MHz to 2.7GHz frequency range. The ESD diodes on every I/O pin, provide a very high level of ESD protection for sensitive electronic components. The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 28 Jul 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1453-04CP http://www.cmd.com/products/dds/?product=CM1453-04CP marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1453-04CP is a pi-style EMI filter array with ESD protection, which integrates four filters (C-L-C) in CSP form factor with 0.40mm pitch. Each EMI filter channel of the CM1453-04CP is implemented as a 3-pole L-C filter where the component values are 9.5pF-20nH-9.5pF. The roll-off frequency at -6dB attenuation is 380MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than -35dB over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every I/O pin, that provide a high level of protection against electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 16 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1453-06CP http://www.cmd.com/products/dds/?product=CM1453-06CP marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1453-06CP is a pi-style EMI filter array with ESD protection, which integrates six filters (C-L-C) in CSP form factor with 0.40mm pitch. Each EMI filter channel of the CM1453-06CP is implemented as a 3-pole L-C filter where the component values are 9.5pF-20nH-9.5pF. The roll-off frequency at -6dB attenuation is 380MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than -35dB over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every I/O pin, that provide a high level of protection against electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 16 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1453-08CP http://www.cmd.com/products/dds/?product=CM1453-08CP marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1453-08CP is a pi-style EMI filter array with ESD protection, which integrates eight filters (C-L-C) in CSP form factor with 0.40mm pitch. Each EMI filter channel of the CM1453-08CP is implemented as a 3-pole L-C filter where the component values are 9.5pF-20nH-9.5pF. The roll-off frequency at -6dB attenuation is 380MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than -35dB over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every I/O pin, that provide a high level of protection against electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 16 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1454 http://www.cmd.com/products/dds/?product=CM1454 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1454 is an EMI filter array with ESD protection in a CSP form factor for the data port of a mobile handset. The CM1454-08 is configured in an 8 channel format and combines both resistor-capacitor (R-C) and inductor-capacitor (L-C) filters in the chip. There are five C-R-C filters with component values of 30pF-100Ω-30pF which are used for the microphone and data ports. There are also three C-LC filters with values of 80pF-3nH-80pF which are designed for the stereo speaker port. more ]]> Fri, 01 May 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1457 http://www.cmd.com/products/dds/?product=CM1457 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1457 is an inductor-based (L-C) EMI filter array with ESD protection, which integrates four, six, or eight filters in a CSP form factor with 0.40mm pitch. Each EMI filter channel of the CM1457 is implemented with the component value of 6pF-35nH–4.7pF-35nH–1.8pF. The cut-off frequency at -3dB attenuation is 300MHz and can be used in applications where the data rates are as high as 160Mbps, while providing greater than -35dB attenuation over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every I/O pin and provide a high level of protection against electrostatic discharge (ESD). The ESD protection diodes connected to the external filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, which is beyond the maximum requirement of the IEC61000-4-2 international standard. more ]]> Mon, 01 Feb 2010 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1460 http://www.cmd.com/products/dds/?product=CM1460 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1460 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-L-C) in small form factor TDFN 0.50mm pitch packages. Each EMI filter channel of the CM1460 is implemented as a 3-pole L-C filter where the component values are 15pF-17nH-15pF. The CM1460's roll-off frequency at -6dB attenuation is 350MHz and can be used in applications where the data rates are as high as 140Mbps while providing greater than 30dB over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 07 May 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1461 http://www.cmd.com/products/dds/?product=CM1461 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1461 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-L-C) in small form factor TDFN 0.50mm pitch packages. Each EMI filter channel of the CM1461 is implemented as a 3-pole L-C filter where the component values are 10pF-20nH-10pF. The CM1461's roll-off frequency at -6dB attenuation is 400MHz and can be used in applications where the data rates are as high as 140Mbps while providing greater than 25dB over the 800MHz to 2.7GHz frequency range. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Thu, 07 Jun 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1470 http://www.cmd.com/products/dds/?product=CM1470 marketing@cmd.com (CMD) EMI Filters CMD's CM1470 is a family of series inductor networks providing EMI filtering for applications that are sensitive to signal integrity such as high-resolution camera interfaces. The CM1470 is configured in 4, 6 and 8 channel formats. Each channel is implemented as a single inductor element where the component value is 17nH. The CM1470 will help suppress EMI radiation to the external environment. The parts integrate ESD diodes on every pin to provide protection during the manufacturing process when the device is placed on the PCB from a pick-and-place machine. The ESD protection diodes safely dissipate ESD strikes of ±2kV, per the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD. more ]]> Wed, 15 Mar 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1481 http://www.cmd.com/products/dds/?product=CM1481 marketing@cmd.com (CMD) EMI Filters + ESD Protectors more ]]> Fri, 30 Mar 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1482 http://www.cmd.com/products/dds/?product=CM1482 marketing@cmd.com (CMD) EMI Filters + ESD Protectors more ]]> Fri, 30 Mar 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1483 http://www.cmd.com/products/dds/?product=CM1483 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1483 is an L-C EMI filter array with ESD protection, which integrates two Pi-filters (C-L-C) for the headset speaker. The CM1483 has component values of 100pF-3nH-100pF. The parts include ESD protection diodes on all input/output pins, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±8kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±15kV. more ]]> Thu, 14 Jun 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1484 http://www.cmd.com/products/dds/?product=CM1484 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1484 is a 2 channel pi-style EMI filter array with ESD protection, housed in a 5-lead SC-70 package. The CM1484 has component values of 11pF-100Ω-11pF per channel. The CM1484 has a cut-off frequency of 220MHz and can be used in applications with data rates up to 80Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MILSTD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 12 May 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1485 http://www.cmd.com/products/dds/?product=CM1485 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1485 is a 2 channel pi-style EMI filter array with ESD protection, housed in a 6-lead SOT-563 package. The CM1485 has component values of 16pF-100Ω16pF per channel. The CM1485 has a cut-off frequency of 125MHz and can be used in applications with data rates up to 48Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MILSTD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 29 Nov 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1492-06DE http://www.cmd.com/products/dds/?product=CM1492-06DE marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1492-06DE comprises 6 channels of EMI filtering with integrated ESD protection ideal for LCD and camera filtering applications. Each Pi-style filter is a capacitor-inductor-capacitor network providing greater than 30dB attenuation at 1GHz. more ]]> Tue, 30 Sep 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1499-E6DE http://www.cmd.com/products/dds/?product=CM1499-E6DE marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1499-E6DE is a six channel pi-style EMI filter array with ESD protection, which integrates six filters (C-R-C) in small form factor 0.50mm pitch, DFN package. The CM1499-E6DE has component values of 15pF-100Ω-15pF per channel. The CM1499-E6DE has a cut-off frequency of 110MHz and can be used in applications with data rates up to 44Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 01 May 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1620 http://www.cmd.com/products/dds/?product=CM1620 marketing@cmd.com (CMD) EMI Filters + ESD Protectors more ]]> Wed, 21 Nov 2007 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1621 http://www.cmd.com/products/dds/?product=CM1621 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1621 is a 6 channel EMI filter array ideal for LCD and camera display applications. Each channel consists of a Pi-style filter in a 17pF-100Ω-17pF (C-R-C) configuration. more ]]> Mon, 04 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1622 http://www.cmd.com/products/dds/?product=CM1622 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1622 is an eight channel EMI filter array for LCD and camera EMI filtering applications. The CM1622 features a Pi-style, C-R-C architecture and offers greater than -35dB attenuation at 1GHz. It also features up to 15kV ESD protection on each channel per the IEC 61000-4-2 Level 4, contact discharge method. more ]]> Mon, 08 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1623 http://www.cmd.com/products/dds/?product=CM1623 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CMD's CM1623 comprises 4 channels of EMI filtering with integrated ESD protection, ideally suited for SIM Card filtering applications. It features Pi-style C-R-C filters with ±15kV ESD protection based on the IEC 61000-4-2 Level 4, contact discharge method. more ]]> Tue, 20 Jan 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=CM1624 http://www.cmd.com/products/dds/?product=CM1624 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1624 is a combination EMI filter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes solid-state, silicon-avalanche technology for superior clamping performance and DC electrical characteristics. The CM1624 has been optimized for protection of TFlash/MicroSD interfaces in cellular phones and other portable electronics. more ]]> Thu, 16 Jul 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1630 http://www.cmd.com/products/dds/?product=CM1630 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1630 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor UDFN 0.40mm pitch packages. The CM1630 has component values of 8.5pF-100Ω-8.5pF per channel. The CM1630 has a cut-off frequency of 200MHz and can be used in applications with data rates up to 80Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 02 Oct 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1631 http://www.cmd.com/products/dds/?product=CM1631 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1631 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor uDFN 0.40mm pitch packages. The CM1631 has component values of 15pF-100Ω-15pF per channel. The CM1631 has a cut-off frequency of 120MHz and can be used in applications with data rates up to 48Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Thu, 05 Apr 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1636 http://www.cmd.com/products/dds/?product=CM1636 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1636 is an EMI filter array with ESD protection, which integrates either four, six or eight pi filters (C-R-C). Each CM1636 filter has component values of 15pF-200Ω-15pF. These parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Fri, 05 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1637 http://www.cmd.com/products/dds/?product=CM1637 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices's CM1637 is an EMI filter array with ESD protection, which integrates either four, six or eight pi filters (C-R-C). Each CM1637 filter has component values of 7.5pF-200Ω-7.5pF. These parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 08 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1641 http://www.cmd.com/products/dds/?product=CM1641 marketing@cmd.com (CMD) ESD Protectors more ]]> Thu, 16 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1681 http://www.cmd.com/products/dds/?product=CM1681 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1681 consists of two EMI filters with ESD Protection and is designed for headset speaker filtering applications. The CM1681 features Pi-style C-R-C filters with component values of 100pF-10Ω-100pF. more ]]> Mon, 08 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1682 http://www.cmd.com/products/dds/?product=CM1682 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CM1682 consists of two EMI filters with ESD Protection and is designed for headset microphone filtering applications. The CM1682 features Pi-style C-R-C filters with component values of 47pF-68Ω-47pF. more ]]> Mon, 08 Jun 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1683 http://www.cmd.com/products/dds/?product=CM1683 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1683 is an L-C EMI filter array with ESD protection, which integrates two Pi-filters (C-L-C) for the headset speaker. The CM1683 has component values of 100pF-3nH-100pF. The parts include ESD protection diodes on all input/output pins, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±8kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±15kV. more ]]> Wed, 20 Jun 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1690 http://www.cmd.com/products/dds/?product=CM1690 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices' CM1690 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-L-C) in small form factor uDFN 0.40mm pitch packages. Each EMI filter channel of the CM1690 is implemented as a 3-pole L-C filter where the component values are 16pF-12nH-16pF. The CM1690's roll-off frequency at -6dB attenuation is 330MHz and can be used in applications where the data rates are as high as 140Mbps while providing greater than -35dB attenuation over the 1.0GHz to 3.0GHz frequency range. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Mon, 25 Jun 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1692 http://www.cmd.com/products/dds/?product=CM1692 marketing@cmd.com (CMD) EMI Filters + ESD Protectors more ]]> Mon, 28 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM1693 http://www.cmd.com/products/dds/?product=CM1693 marketing@cmd.com (CMD) EMI Filters + ESD Protectors California Micro Devices’ CM1693 is a family of pi-style EMI filter arrays with ESD protection, which integrates four or eight filters (C-L-C) into a small-form factor, uDFN 0.40mm pitch package. Each EMI filter channel is implemented as a 3-pole L-C filter, where the component values are 10pF-26nH-12pF. The CM1693's roll-off frequency at -6dB attenuation is 300MHz and can be used in applications where the data rates are as high as 140Mbps. The CM1693 also provides greater than -30dB attenuation over the 800MHz to 6GHz frequency range. The device includes ESD diodes on every pin that provide a very high level of protection for sensitive electronic components against possible electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±18kV, which is beyond the maximum requirement of the IEC61000-4-2 international standard. more ]]> Tue, 28 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2006 http://www.cmd.com/products/dds/?product=CM2006 marketing@cmd.com (CMD) VGA Port Interfaces The CM2006 connects between the VGA or DVI-I port connector and the internal analog or digital flat panel controller logic. The CM2006 incorporates ESD protection for all signals, level shifting for the DDC signals and buffering for the SYNC signals. ESD protection for the video, DDC and SYNC lines is implemented with low-capacitance current steering diodes. more ]]> Fri, 16 Oct 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2009 http://www.cmd.com/products/dds/?product=CM2009 marketing@cmd.com (CMD) VGA Port Interfaces The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA or DVI-I port connector. The CM2009 incorporates ESD protection for all signals, level shifting for the DDC signals and buffering for the SYNC signals. ESD protection for the video, DDC and SYNC lines is implemented with low-capacitance current steering diodes. more ]]> Tue, 17 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2020-00TR http://www.cmd.com/products/dds/?product=CM2020-00TR marketing@cmd.com (CMD) HDMI and DVI Port Interfaces The CM2020-00TR HDMI Transmitter Port Protection and Interface device is specifically designed for next generation HDMI source interface protection. more ]]> Fri, 03 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2020-01TR http://www.cmd.com/products/dds/?product=CM2020-01TR marketing@cmd.com (CMD) HDMI and DVI Port Interfaces The CM2020-01TR HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Source interface protection. more ]]> Thu, 03 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2021-02TR http://www.cmd.com/products/dds/?product=CM2021-02TR marketing@cmd.com (CMD) HDMI and DVI Port Interfaces The CM2021-02TR HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. more ]]> Mon, 14 Jul 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2030 http://www.cmd.com/products/dds/?product=CM2030 marketing@cmd.com (CMD) HDMI and DVI Port Interfaces The CM2030 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. more ]]> Tue, 11 Aug 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM2031 http://www.cmd.com/products/dds/?product=CM2031 marketing@cmd.com (CMD) HDMI and DVI Port Interfaces The CM2031 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Sink interface protection. more ]]> Tue, 11 Aug 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM3103 http://www.cmd.com/products/dds/?product=CM3103 marketing@cmd.com (CMD) LDO Regulators + Other The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Power is always taken in priority of VCC, then VAUX. more ]]> Wed, 28 Jan 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=CM3106 http://www.cmd.com/products/dds/?product=CM3106 marketing@cmd.com (CMD) LDO Regulators + Other The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory systems, and 1.2A for DDR-II systems, while maintaining a load regulation of 0.5% in either application. more ]]> Mon, 02 Feb 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=CM3202-02 http://www.cmd.com/products/dds/?product=CM3202-02 marketing@cmd.com (CMD) Linear Regulators The CM3202-02 is a dual-output low noise linear regulator designed to meet SSTL-2 and SSTL-3 specifications for DDR-SDRAM VDDQ supply and termination voltage VTT supply. With integrated power MOSFETs the CM3202-02 can source up to 2A of VDDQ continuous current, and source or sink up to 2A VTT continuous current. The typical dropout voltage for VDDQ is 500mV at 2A load current. more ]]> Thu, 16 Apr 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM3212 http://www.cmd.com/products/dds/?product=CM3212 marketing@cmd.com (CMD) Linear Regulators The CM3212 is a dual-output low noise linear regulator designed to meet SSTL-2 and SSTL-3 specifications for DDR-SDRAM VDDQ supply and termination voltage VTT supply. With integrated power MOSFETs the CM3212 can source up to 2A of VDDQ continuous current, and source or sink up to 2A VTT continuous current. The typical dropout voltage for VDDQ is 500mV at 2A load current. more ]]> Tue, 19 May 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CM3702 http://www.cmd.com/products/dds/?product=CM3702 marketing@cmd.com (CMD) Charge Pumps + LDO The CM3702 low-noise charge pump LDO regulator is designed to provide accurate and "clean" power to a subsystem, e.g an LED driver, audio codec or flash memory. The 5V output provides up to 100mA continuous current for input voltages from 3.0V to 5.5V, and up to 200mA for a narrower range. This is accomplished with an integrated charge pump that boosts the input voltage before feeding it to an internal LDO linear regulator. The charge pump is designed to maintain a nominal 0.8V differential between the input and output of the LDO regulator. This allows the LDO regulator to operate with good power supply ripple rejection across the audio band while maintaining good power efficiency. The charge pump works with two external capacitors and operates at 250kHz, well outside the audible frequency band. In addition, separate analog and digital ground pins are provided for the charge pump and the rest of the circuitry to eliminate ground noise feed-through from the charge pump to the regulated output. more ]]> Mon, 20 Mar 2006 03:00:00 PST http://www.cmd.com/products/dds/?product=CM3702EVAL http://www.cmd.com/products/dds/?product=CM3702EVAL marketing@cmd.com (CMD) Charge Pumps + LDO The CM3702EVAL is a ready-to-use product evaluation board designed specifically for the CM3702 micropower low-noise charge pump LDO regulator. This board provides all necessary components and power connections to conveniently evaluate the CM3702. more ]]> Tue, 21 Dec 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=CM5100 http://www.cmd.com/products/dds/?product=CM5100 marketing@cmd.com (CMD) MDDI Interface Display Controller As wireless handsets support more and more advanced multimedia capabilities, data rates between the host processor and high resolution displays and cameras are increasing accordingly. As a result, platform designers need to address more and more challenging issues in terms of power consumption and complexity. The MDDI high speed serial interface alleviates all of these issues by significantly reducing the number of lines routed between modules (often through a highly sensitive flexible cable), leading to a less complex, lower power and lower cost design. more ]]> Wed, 31 Dec 1969 03:00:00 PST http://www.cmd.com/products/dds/?product=CM6100 http://www.cmd.com/products/dds/?product=CM6100 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 11 Jul 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CMCPCI102B http://www.cmd.com/products/dds/?product=CMCPCI102B marketing@cmd.com (CMD) CompactPCI Interfaces The CMCPCI102BT/BR is a 10-channel backplane interface/termination IC specifically designed for CompactPCI redundant system-slot cards. The CMCPCI102BT/BR allows CompactPCI boards to interface to the backplane and provides the versatility to use system cards in any slot (system or peripheral). Per the CompactPCI specification, the CMCPCI102BT/BR provides a 10Ω termination resistor for each channel to terminate the transmission line stub on the board. An integral series switch and associated control signal (SW_EN) permits connection/disconnection of the channel, so that the device side of the circuit may be isolated from the backplane side. more ]]> Mon, 28 Feb 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CMPWR025 http://www.cmd.com/products/dds/?product=CMPWR025 marketing@cmd.com (CMD) Power Switches California Micro Devices' SmartOR™ CMPWR025 is a dual input power switch that selects between two different power inputs and delivers it to one output. The device integrates two very low impedance power switches and automatically implements an OR function that selects the higher of the two inputs. A hysteresis is built in (and is user selectable) to prevent switch chatter. more ]]> Mon, 23 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CMPWR101 http://www.cmd.com/products/dds/?product=CMPWR101 marketing@cmd.com (CMD) LDO Regulators + Other The California Micro Devices' SmartOR™ CMPWR101 is a low dropout regulator that delivers up to 250mA of load current at a fixed 3.3V output. An internal threshold level (typically 4.1V) is used to prevent the regulator from being operated below dropout voltage. The device continuously monitors the input supply and will automatically disable the regulator when VCC falls below the threshold level. When the regulator is disabled, a low impedance, fully integrated switch is enabled which allows the output to be directly powered from an auxiliary 3.3V supply. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CMPWR150 http://www.cmd.com/products/dds/?product=CMPWR150 marketing@cmd.com (CMD) LDO Regulators + Other The CMPWR150 is a low dropout regulator that delivers up to 500mA of load current at a fixed 3.3V output. An internal threshold level (typically 4.1V) is used to prevent the regulator from being operated below dropout voltage. The device continuously monitors the input supply and will automatically disable the regulator when VCC falls below the threshold level. When the regulator is disabled, the control signal "Drive" (Active Low) is enabled, which allows an external PMOS switch to power the load from an auxiliary 3.3V supply. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CMPWR280 http://www.cmd.com/products/dds/?product=CMPWR280 marketing@cmd.com (CMD) LDO Regulators + Other The California Micro Devices' SmartOR™ CMPWR280 is a fully protected Dual-Input low-dropout CMOS regulator that also provides the necessary control signal for driving an external auxiliary P-channel MOSFET switch. The SmartOR™ device automatically selects one of three possible inputs on a priority basis: VCC (1.5A), VSBY (375mA) or VAUX via the drive signal used to control an external switch. more ]]> Tue, 13 Dec 2005 03:00:00 PST http://www.cmd.com/products/dds/?product=CMPWR330 http://www.cmd.com/products/dds/?product=CMPWR330 marketing@cmd.com (CMD) LDO Regulators + Other The CMPWR330 is a dual input regulator with a fully integrated VAUX switch capable of delivering up to 400mA continuously at 3.3V. The input is taken from three independent voltage sources on a prioritized basis. Power is always taken in priority using the order of VCC, VSBY, and VAUX. more ]]> Tue, 22 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI201A http://www.cmd.com/products/dds/?product=CSPEMI201A marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI201A is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This part is custom-designed to interface with a speaker port on a cellular telephone or similar device. Each high quality filter provides more than 35dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from a speaker element. They also support bipolar signals with a cutoff frequency of 31MHz, enabling audio signals to pass through without distortion. more ]]> Mon, 23 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI202A http://www.cmd.com/products/dds/?product=CSPEMI202A marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI202A is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This part is custom-designed to interface with a microphone port on a cellular telephone or similar device. Each high quality filter provides more than 35dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from a microphone element. They also support bipolar signals, enabling audio signals to pass through without distortion. more ]]> Mon, 23 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI205 http://www.cmd.com/products/dds/?product=CSPEMI205 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI205 is a low-pass filter array integrating three pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This device is custom-designed to interface with the headset port on a cellular telephone, and contains two different filter values. Each high quality filter provides more than 30dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from the microphone and speaker elements. They also support bipolar signals, enabling audio signals to pass through without distortion. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI306A http://www.cmd.com/products/dds/?product=CSPEMI306A marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI306A is a six channel low-pass filter array that reduces EMI/RFI emissions while at the same time providing ESD protection. It is used on data ports on mobile devices. To reduce EMI/RFI emissions, the CSPEMI306A integrates a pi-style filter (C-R-C) for each of the 6 channels. Each high quality filter provides greater than 30dB attenuation in the 800-2700 MHz range. These pi-style filters also support bidirectional filtering, controlling EMI both to and from a data port connector. more ]]> Sun, 05 Oct 2003 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI307A http://www.cmd.com/products/dds/?product=CSPEMI307A marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI307A is a multichannel EMI/ESD array offering a combination of four low-pass filter + ESD channels to reduce EMI/RFI emissions on a data port and four dedicated ESD-only channels intended specifically for ESD protection on a USB port. Each EMI/RFI channel integrates a high quality pi-style filter (C-R-C) which provides greater than 30dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from a data port connector. more ]]> Thu, 06 Oct 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI400 http://www.cmd.com/products/dds/?product=CSPEMI400 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CSPEMI400 is an EMI filter array with ESD protection, which integrates three pi filters (C-R-C) and two additional channels of ESD protection. The CSPEMI400 has component values of 20pF-47Ω-20pF, and 20pF-100Ω-20pF. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±10kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±25kV. more ]]> Wed, 28 Sep 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI606 http://www.cmd.com/products/dds/?product=CSPEMI606 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CSPEMI606 and CSPEMI608 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CSPEMI60x has component values of 15pF-100Ω-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI607 http://www.cmd.com/products/dds/?product=CSPEMI607 marketing@cmd.com (CMD) EMI Filters + ESD Protectors The CSPEMI607G is a multi-channel array consisting of four low-pass filters with integrated ESD protection and four ESD-only protection channels that are designed to reduce EMI/RFI emissions on LCD data lines in mobile handsets. The CSPEMI607G has component values of 15pF-100O-15pF. These devices include ESD protection diodes on every pin and provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Tue, 04 Aug 2009 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPEMI608 http://www.cmd.com/products/dds/?product=CSPEMI608 marketing@cmd.com (CMD) EMI Filters + ESD Protectors CAMD's CSPEMI606 and CSPEMI608 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CSPEMI60x has component values of 15pF-100Ω-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. more ]]> Wed, 30 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=CSPESD304 http://www.cmd.com/products/dds/?product=CSPESD304 marketing@cmd.com (CMD) ESD Protectors The CSPESD304 is a quad ESD transient voltage supression diode array. Each diode provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). These diodes safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than ±30kV. more ]]> Tue, 27 Sep 2005 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN004 http://www.cmd.com/products/dds/?product=PACDN004 marketing@cmd.com (CMD) ESD Protectors The PACDN004 is a diode array designed to provide two channels of ESD protection for electronic components or sub-systems. Each channel consists of a pair of diodes which steers the ESD current pulse either to the positive (VP) or negative (VN) supply. The PACDN004 will protect against ESD pulses up to ±15 kV Human Body Model, and ±8kV contact discharge per International Standard IEC 61000-4-2. more ]]> Tue, 17 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN006 http://www.cmd.com/products/dds/?product=PACDN006 marketing@cmd.com (CMD) ESD Protectors The PACDN006 is a diode array designed to provide 6 channels of ESD protection for electronic components or sub-systems. Each channel consists of a pair of diodes which steers an ESD current pulse to either the positive (VP) or negative (VN) supply. more ]]> Wed, 18 Nov 2009 03:00:00 PST http://www.cmd.com/products/dds/?product=PACDN009 http://www.cmd.com/products/dds/?product=PACDN009 marketing@cmd.com (CMD) ESD Protectors The PACDN009 is a diode array designed to provide 5 channels of ESD protection for electronic components or sub-systems. Each channel consists of a pair of diodes which steers an ESD current pulse to either the positive (VP) or negative (VN) supply. The PACDN009 protects against ESD pulses up to ±15kV Human Body Model (100 pF capacitor discharging through a 1.5KΩ resistor), and ±8kV contact discharge, per International Standard IEC 61000-4-2. more ]]> Mon, 23 Jun 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN042 http://www.cmd.com/products/dds/?product=PACDN042 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 29 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN043 http://www.cmd.com/products/dds/?product=PACDN043 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 29 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN044 http://www.cmd.com/products/dds/?product=PACDN044 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 29 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN045 http://www.cmd.com/products/dds/?product=PACDN045 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 29 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN046 http://www.cmd.com/products/dds/?product=PACDN046 marketing@cmd.com (CMD) ESD Protectors more ]]> Fri, 29 Aug 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN1404 http://www.cmd.com/products/dds/?product=PACDN1404 marketing@cmd.com (CMD) ESD Protectors The PACDN1404 and PACDN1408 are 4 and 8 channel transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components that may be subjected to ESD. more ]]> Mon, 14 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACDN1408 http://www.cmd.com/products/dds/?product=PACDN1408 marketing@cmd.com (CMD) ESD Protectors The PACDN1404 and PACDN1408 are 4 and 8 channel transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components that may be subjected to ESD. more ]]> Mon, 14 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACSZ1284 http://www.cmd.com/products/dds/?product=PACSZ1284 marketing@cmd.com (CMD) Passive Interface Devices The PACSZ1284 combines EMI filtering, ESD protection, and signal termination in a single QSOP package for parallel port interfaces complying to the IEEE 1284 standard. more ]]> Wed, 23 Apr 2008 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSB-D1 http://www.cmd.com/products/dds/?product=PACUSB-D1 marketing@cmd.com (CMD) Passive Interface Devices The PACUSB-D1/D2/D3 is a single-channel USB downstream-port termination network. It integrates EMI/RFI filter components R1 and C1, as recommended by the USB specification as well as the required 15kΩ pull-down resistors (R2) to GND. In addition, PACUSB-D1/D2/D3 provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The device pins will safely dissipate ESD strikes of ±15kV, exceeding the maximum requirements of the IEC 61000-4-2 international standard. Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected from contact discharges to ±20kV. more ]]> Tue, 14 Sep 2004 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSB-D2 http://www.cmd.com/products/dds/?product=PACUSB-D2 marketing@cmd.com (CMD) Passive Interface Devices The PACUSB-D1/D2/D3 is a single-channel USB downstream-port termination network. It integrates EMI/RFI filter components R1 and C1, as recommended by the USB specification as well as the required 15kΩ pull-down resistors (R2) to GND. In addition, PACUSB-D1/D2/D3 provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The device pins will safely dissipate ESD strikes of ±15kV, exceeding the maximum requirements of the IEC 61000-4-2 international standard. Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected from contact discharges to ±20kV. more ]]> Tue, 14 Sep 2004 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSB-U1 http://www.cmd.com/products/dds/?product=PACUSB-U1 marketing@cmd.com (CMD) Passive Interface Devices The PACUSB-U1, PACUSB-U2, and PACUSB-U3 are single-channel USB upstream-port termination networks. more ]]> Mon, 01 May 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSB-U2 http://www.cmd.com/products/dds/?product=PACUSB-U2 marketing@cmd.com (CMD) Passive Interface Devices The PACUSB-U1, PACUSB-U2, and PACUSB-U3 are single-channel USB upstream-port termination networks. more ]]> Mon, 01 May 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSB-U3 http://www.cmd.com/products/dds/?product=PACUSB-U3 marketing@cmd.com (CMD) Passive Interface Devices The PACUSB-U1, PACUSB-U2, and PACUSB-U3 are single-channel USB upstream-port termination networks. more ]]> Mon, 01 May 2006 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACUSBVB-D1 http://www.cmd.com/products/dds/?product=PACUSBVB-D1 marketing@cmd.com (CMD) Passive Interface Devices The PACUSBVB-D1/D2/D3 is a single-channel USB downstream-port termination network. It integrates EMI/RFI filter components R1 and C1, as recommended by the USB specification as well as the required 15kΩ pull-down resistors (R2) to GND. In addition, PACUSBVB-D1/D2/D3 provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The device pins will safely dissipate ESD strikes of ±15kV, exceeding the maximum requirements of the IEC 61000-4-2 international standard. Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected from contact discharges to ±20kV. more ]]> Mon, 15 Nov 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=PACUSBVB-D2 http://www.cmd.com/products/dds/?product=PACUSBVB-D2 marketing@cmd.com (CMD) Passive Interface Devices The PACUSBVB-D1/D2/D3 is a single-channel USB downstream-port termination network. It integrates EMI/RFI filter components R1 and C1, as recommended by the USB specification as well as the required 15kΩ pull-down resistors (R2) to GND. In addition, PACUSBVB-D1/D2/D3 provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The device pins will safely dissipate ESD strikes of ±15kV, exceeding the maximum requirements of the IEC 61000-4-2 international standard. Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected from contact discharges to ±20kV. more ]]> Mon, 15 Nov 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=PACVGA105 http://www.cmd.com/products/dds/?product=PACVGA105 marketing@cmd.com (CMD) VGA Port Interfaces The PACVGA105 incorporates 7 channels of ESD protection for signal lines commonly found in a VGA port for PCs. ESD protection is implemented with current steering diodes designed to safely handle the high peak surge currents associated with the IEC-1000-4-2 Level-4 ESD Protection Standard (±8kV contact discharge). When the channels are subjected to an electrostatic discharge, the ESD current pulse is diverted via the protection diodes into the positive supply rails or ground where they may be safely dissipated. more ]]> Wed, 28 Jan 2004 03:00:00 PST http://www.cmd.com/products/dds/?product=PACVGA200 http://www.cmd.com/products/dds/?product=PACVGA200 marketing@cmd.com (CMD) VGA Port Interfaces The PACVGA200 incorporates seven channels of ESD protection for all signal lines commonly found in a VGA port. ESD protection is implemented with current steering diodes designed to safely handle the high surge currents encountered with IEC-61000-4-2 Level4 ESD Protection (8KV contact discharge). When a channel is subjected to an electrostatic discharge, the ESD current pulse is diverted via the protection diodes into either the positive supply rail or ground where it may be safely dissipated. Separate positive supply rails are provided for the VIDEO, DDC and SYNC channels to facilitate interfacing with low voltage Video Controller ICs and provide design flexibility in multi-supply-voltage environments. more ]]> Tue, 07 Aug 2007 03:00:00 PDT http://www.cmd.com/products/dds/?product=PACVGA201 http://www.cmd.com/products/dds/?product=PACVGA201 marketing@cmd.com (CMD) VGA Port Interfaces The PACVGA201 provides seven channels of ESD protection for all signal lines commonly found in a VGA port. ESD protection is implemented with current-steering diodes designed to safely handle the high surge currents encountered with IEC-61000-4-2 Level-4 ESD Protection (8kV contact discharge). When a channel is subjected to an electrostatic discharge, the ESD current pulse is diverted via the protection diodes into the positive supply rail or ground where it may be safely dissipated. more ]]> Thu, 24 Apr 2008 03:00:00 PDT