Press Release

California Micro Devices Adds Family of Fractional Charge Pump LED Drivers for Wireless Handsets
Enhanced PhotonIC™ Portfolio Delivers High Efficiency for Low Bills of Materials

MILPITAS, Calif., -- May 1, 2006 -- California Micro Devices (NASDAQ: CAMD) today introduced significant additions to its PhotonIC™ portfolio of white LED (WLED) drivers for wireless handset applications. Following the acquisition of Arques Technology (see separate release), California Micro Devices announced the integration of a compelling and differentiated family of fractional charge pump WLED drivers. With increased demand for brighter and larger resolution displays, powerful camera flash capabilities for multi megapixel sensor resolutions and various types of LEDs to support keypad backlight and multimedia capabilities, wireless handset designers become increasingly concerned with the efficiency of the LED driver sub system.

California Micro Devices’ PhotonIC™ product portfolio of white LED drivers now includes five current regulated fractional charge pump products (CM913x/4x) that can drive up to six WLEDs, as well as three voltage regulated products (CM915x). All these products feature a simple analog control interface as well as optimal efficiency in a compact footprint.

Current Regulated Products: CM913x/4x
The CM913x/4x family consists of five fractional charge pump products described in the following table:

Product	Driving Capabilities
CM9130	One group of 3 matched WLEDs
CM9132	One group of 3 matched WLEDs + One group of 2 matched WLEDs
CM9133	One group of 3 matched WLEDs + One group of 3 matched WLEDs
CM9140	One group of 4 matched WLEDs
CM9142	One group of 4 matched WLEDs + One group of 2 matched WLEDs

These products support an input voltage range of 2.9V to 6V and feature an adaptive charge pump architecture of 1x and 1.5x (fractional) in order to achieve optimal efficiency and still be capable of driving up to 50mA on each output with a current matching of 2 percent. Such solutions require no external ballast resistor or inductor, thus minimizing the footprint of the complete solution. Using this architecture also helps designers significantly reduce EMI (electro- magnetic interference). Each group of LEDs is independently controlled through PWM and analog interfaces. These products operate at a switching frequency of 500 kHz and feature OTP (Over Temperature Protection), OCP (Over Current Protection), soft start circuit to prevent excessive in rush current and a low shutdown current. They are housed in a 4mm x 4mm QFP package. These products are ideal to drive display backlights as well as keypad or camera flash LEDs in the most efficient way in a compact footprint.

Voltage Regulated Products: CM915x
The CM915x family consists of three products described in the following table:

Product	Driving Capabilities
CM9153	Up to 6 WLEDs – 650 kHz – DFN8 or MSOP8 packages
CM9156A	Up to 6 WLEDs – 4 Selectable frequencies – DFN10 or MSOP10 packages
CM9156B	Up to 6 WLEDs – 2 Selectable frequencies – DFN10 or MSOP10 packages

This product family features a fixed output voltage of 4.5V with a low output ripple of less than 1percent and an accuracy of 2 percent. They can operate in both 1x and 1.5x (fractional) modes in order to optimize efficiency. The CM9156A and CM9156B offer selectable switching frequencies to allow further power savings reduction. The CM9153 is housed in compact DFN8 or MSOP8, and the CM9156A/B are offered in either DFN10 or MSOP10. They also feature OTP, OCP and a soft start. The CM9156 is pin to pin compatible with other solutions in the market but offers higher efficiency, and therefore gives designers the opportunity of improving their WLED sub-system efficiency.


Application & Deliverables
Both product families are a perfect fit to drive backlight, keypad and camera flash LED sub systems in the most efficient way in a compact footprint and at the lowest bill of materials. Reference design kits are available to customers to allow rapid evaluation of the advantages and benefits of this product portfolio.

Pricing and Availability
All the products described are currently sampling and reference design kits are available. Pricing ranges from $0.60 to $1.20 in 1,000 units. Production is scheduled for Q2 2006.

About California Micro Devices Corporation
California Micro Devices Corporation is a leading supplier of application specific analog semiconductor products for the mobile handset, personal computer and digital consumer electronic markets. Key products include Application Specific Integrated Passive™ (ASIP™) devices and selected high value mixed signal ICs. Detailed corporate and product information may be accessed at www.calmicro.com.

Application Specific Integrated Passive™, ASIP™ and PhotonIC™ are trademarks of California Micro Devices. All other trademarks are property of their respective owners.